3M Vhb Sticky Adhesive Pads for Magnetic Phone Car Mount

Please adhere to the following guidelines when using the 3M stick adhesive pad:

1. Do not stick the adhesive pad on very soft, rugged, textured, greasy surfaces, or leather surfaces.
2. Remove any residual glue and ensure the surface is clean before application.
3. The 3M Vbh adhesive pad is for one-time use, so please seal it for preservation.
4. Allow at least 24 hours after application before use for stronger viscosity.
5. When peeling off the protective film, press firmly for at least 2 minutes, then wait for approximately 2 hours before removing the other side's red film. If the red film is difficult to peel off, press it back and try again without touching the gel.

For easy installation:

1. Remove residual glue and clean the car phone mount base thoroughly.
2. Peel off the yellow protective film.
3. Apply the adhesive pad to the base, pressing firmly for 4 minutes before removing the red film.
4. Clean and dry the desired surface and carefully apply the adhesive pad, pressing firmly for 5 minutes.
5. Wait at least 24 hours before using to ensure proper adhesion. If the red film is difficult to remove, press it back before trying again.

The package includes 4 3M Vhb adhesive pads and a user manual. The pads are strong and suitable for various materials with flat, hard surfaces, such as mirrors, refrigerators, walls, and more. They are also compatible with magnetic car phone mount holders for stability on bumpy roads.

These adhesive pads are high and low-temperature resistant, waterproof, and tear-off without leaving residue. Remember not to stick them on unsuitable surfaces, ensure the surface is clean, and wait 24 hours before using for best results. Additionally, APPS2Car offers a worry-free lifetime warranty and excellent customer service.

product information: